Testing
Lubrizol has committed significant resources to testing capabilities that ensure compliance with a full range of standards and protocols worldwide.
| Accelerated wheel bearing grease leakage |
ASTM D4290 |
| Acid & base number, colorimetric method |
ASTM D974 |
| Acid & base number, potentionmetric |
ASTM D664 |
| Apparent viscosity |
ASTM D1092 |
| Bearing rust test |
ASTM D1743/5969 |
| Copper corrosion |
ASTM D4048/IP 112 |
| Cone penetration |
ASTM D217/ISO 2137 |
| Cone penetration 1/4 & 1/2 |
ASTM D1403 |
| Contact (grease maker) |
|
| CVJ efficiency rig |
|
| Dropping point |
ASTM D2265 |
| Elemental Analysis |
ICP |
| Emcor dynamic rust test |
IP220/ISO 11007 |
| Evaporation loss |
IP183 |
| FAG FE8 |
DIN51819T2 |
| Four ball wear |
ASTM D2266 |
| Four ball EP |
ASTM D2596 |
| Elastomer compatibility |
ASTM D4289/D471 |
| Fretting wear |
ASTM D4170 |
| FTIR |
|
FZG gear
|
low speed
high speed |
ISO 14735.03
ASTM D5182 |
| Grease analysis |
ASTM D128 |
| Low temperature torque |
ASTM D1478 |
Life performance automotive wheel
bearing |
ASTM D3527 |
| Oil separation |
ASTM D6184 |
| Oil Separation |
IP121 |
| Oil separation during storage |
D1742 |
| Open kettle (grease maker) |
|
| Oxidation stability, bomb method |
ASTM D942 |
| PDSC oxidation induction time |
ASTM D5483 |
| Rheometer |
|
| Roll stability |
ASTM D1831 |
| Rolling bearing grease performance |
IP168 |
| Salt fog corrosion |
B117 |
| SRV |
ASTM D5707/5706 |
| Timken EP |
ASTM D2509 |
| Water in petroleum products (dean & stark) |
ASTM D95/ISO 3733 |
| Water spray-off |
ASTM D4049 |
| Water washout |
ASTM D1264/ISO 11009 |
| Wheel bearings low temp torque |
ASTM D4693 |
| Water resistance |
DIN 51807 part 1 |