| Lanco™ Micronized Surface Modifiers |
| Product |
Type |
Maximum Particle Size via Laser Diffraction Medium (um-Dv50) |
(um-Dv90) |
Melting Point
(°C) |
Melting Point
(°F) |
Maximum Acid Value
(mg KOH/g wax) |
Density (g/cc) @ 20 °C |
Description/Suggested Uses |
| Lanco 106 |
Functionalized Surface Modifier |
<9 |
<18 |
110 |
230 |
<1 |
0.95 |
Easy-to-use micronized surface modifier that provides surface protection, good feel and matting. Can be easily dispersed even with low-speed mixers. |
| Lanco 208 |
Functionalized Surface Modifier |
≤9 |
≤18 |
123 |
253 |
<1 |
1.02 |
Improves scratch and abrasion resistance as well as pencil hardness. Can be easily dispersed even with low-speed mixers. |
| Lanco 1725 and 1725 EF |
PTFE-Modified PE |
6,5 |
14,10 |
126 |
259 |
1 |
0.98 |
General use PTFE-modified polyethylene wax, similar to TF 1778 but with a harder PE composition, provides excellent slip-, scratch- and abrasion-resistance. |
| Lanco PP 1362 D |
Modified PP |
9,6 |
22,14 |
140 |
284 |
3 |
0.94 |
General use polypropylene-modified polyethylene wax that provides good matting and scratch resistance. |
| Lanco TF 1778 |
PTFE-Modified PE |
6 |
14 |
102 |
216 |
1 |
0.98 |
General use PTFE-modified polyethylene ax providing excellent slip-, scratch- and abrasion-resistance. |
| Lanco 1530 SF |
PE |
6 |
14 |
118 |
244 |
– |
0.97 |
Coil coatings – general use to yield fine, smooth finish with improved scratch-resistance. |
| Lanco TF 1768 |
PTFE-Modified PE |
9 |
22 |
105 |
221 |
<1 |
1.14 |
Very good slip and abrasion resistance as well as good metal marking resistance. Maintains excellent compatibility and dispersibility. |